High End Finishes

1. Building Structure
Use of reinforced concrete Grade C30 or above, according to the structural design calculations. The structural design follows European Standards and the seismic code.

​

2. Walls and Brickwork
A combination of fair face concrete and hollow thermal clay bricks are used, according to Cyprus Standards. Brick walls are internally plastered and externally rendered with 3 coats of plaster and 3 coats of paint, of which the 3rd layer will be waterproof.

​

3. Insulation

• (a) Moisture control: Foundation, roof, and balconies will be screed leveled. Then, two coats of adhesion primer will be applied, followed by 3 coats of moisture control paint.

• (b) Thermal Insulation: All exposed surfaces (walls and roof) will be insulated with a thermal facade system.

• (c) Energy Efficiency: Building Energy Efficiency Class A.

​

4. Finishes

• (a) External doors and windows: Double-glazed aluminum frames (thermal).

• (b) Internal doors: Wooden doors with a melamine finish (oak or equivalent) and aluminum-framed glass doors.

• (c) Entrance doors: Made of timber (Iroko or equivalent).

• (d) Floors and walls: Full-body ceramic tiles will be installed in all living and kitchen areas. All bedrooms will have laminated parquet flooring. Ceramic tiles will be placed on all bathroom and toilet floors and walls. Staircases will have marble. All verandas will have anti-slip tiles (R11). All sills and thresholds will be marble.

• (e) Wardrobes and kitchen units: All wardrobes and kitchen cupboards shown on the drawings will be manufactured from melamine panels, featuring a soft-closing mechanism.

• (f) Sanitary fittings: Top-quality sanitary products will be installed.

• (g) Front balconies: Cladded with High-Pressure Laminate (HPL) wood. A thermal facade system will also be installed, as well as a coat of insulating waterproofing primer.

​

5. Electrical Installation
Installed according to E.A.C. regulations, as shown on the plans. A central T.V. system is also included. In select areas, there will be false ceilings with spotlights and hidden lighting.

​

6. Water Supply
Installed according to the plans with a pipe-in-pipe system and a pressure system. Solar panels and a 1,000-liter capacity PVC water tank are included.

​

7. Cooling / Heating A/C
Units (hot & cold) will be installed in each bedroom and in all living areas.

​

8. Common Areas

• (a) Car Parking: As per drawings. All apartments come with one parking space. The project can accommodate one accessible parking space.

• (b) Landscaping: Non-paved external areas are to be landscaped and planted.

​

Notes:

1. Prices quoted are the showroom retail prices, available only at M.C. GAN VENTURES LTD collaborator showrooms.

2. VAT is included in the prices.

3. Clients are entitled to carry out any internal alterations with the approval of the Architect and subject to project progress.